Ekspor Produk Barang Besi & Baja ke Vietnam

Berikut ini informasi persyaratan mutu dan regulasi teknis terkait produk yang akan diekspor ke Vietnam.

1. Undang-Undang.

1.1 Manjemen Perdagangan Luar Negeri.

Law No. 05/2017/QH14 on Foreign Trade Management. Undang-undang ini mengatur langkah-langkah untuk tata kelola perdagangan luar negeri, pengembangan kegiatan perdagangan luar negeri dan penyelesaian sengketa tentang penerapan langkah-langkah tata kelola perdagangan luar negeri. Kegiatan perdagangan luar negeri mencakup ekspor dan impor, impor sementara untuk diekspor kembali, ekspor sementara untuk diimpor kembali, transfer lintas batas dan transit, dan kegiatan lain yang terkait dengan pembelian dan penjualan barang internasional sesuai dengan hukum serta perjanjian yang ditandatangani oleh Republik Sosialis Vietnam.

1.2 Undang-Undang Mutu Produk dan barang.

Law No. 05/2007/QH12 on Product and Goods Quality. Undang-undang ini mengatur tentang hak dan kewajiban organisasi maupun perseorangan yang memproduksi atau memperdagangkan produk atau barang serta organisasi dan individu yang melakukan kegiatan yang berkaitan dengan mutu produk dan barang dan tata kelola mutu produk dan barang.

1.3 Undang-Undang Standar dan Regulasi Teknis.

Law No. 68/2006/QH11 on Standards and Technical Regulations. Undang-undang ini mengatur tentang perumusan, penerbitan dan penerapan standar, perumusan, pengundangan dan penerapan regulasi teknis, dan penilaian kesesuaian dengan standar dan regulasi teknis. System standar di Viet Nam terdiri dari standar nasional (TCVN) dan standar perusahaan (TCCS). Sedangkan, system regulasi teknis di Viet Nam terdiri dari regulasi teknis nasional (QCVN) dan regulasi teknis local (QCDP).

1.4 Undang-Undang Perlindungan Hak Konsumen.

Law No. 59/2010/QH12 on Protection of Consumer’s Right. Undang-undang ini mengatur tentang hak dan kewajiban konsumen, kewajiban organisasi atau perorangan yang memperdagangkan barang dan/atau jasa kepada konsumen, kewajiban organisasi sosial dalam melindungi kepentingan konsumen, penyelesaian sengketa antara konsumen dengan organisasi atau individu yang memperdagangkan barang dan/atau jasa.

2. Regulasi.

2.1 Pengendalian Mutu Produk Baja.

Joint Circular No. 58/2015/TTLT-BCT-BKHCN providing for management of domestically-produced and imported steel quality.

Regulasi ini mengatur tentang pengelolaan mutu baja yang diproduksi di Viet Nam, dan baja impor berdasarkan kode HS. Aturan yang diterapkan antara lain (selengkapnya dapat dilihat disini):

  • Ketentuan Pengelolaan Mutu Baja
  • Inspeksi Mutu Baja
    • Deklarasi Baja Impor
    • Informasi Baja Paduan Impor
    • Pendaftaran Inspeksi Mutu Baja Impor
    • Penerimaan Permohonan Inspeksi Mutu Baja Impor
    • Hasil Inspeksi Mutu Baja Impor
  • Organisasi Pelaksana
  • Sertifikat Waktu Inspeksi Berturut-turut yang Dilakukan di Organisasi Penilaian Kesesuaian yang Sama
  • Persetujuan untuk metode pemeriksaan yang disederhanakan yang diterapkan pada pemeriksaan kualitas baja impor

 

Daftar Produk Baja Yang Memerlukan Pemeriksaan  Mutu Menurut Standar Dasar, Standar Nasional Vietnam (TCVN), Standar Regional, Standar Negara Lain dan Standar Internasional.

Kode HS Deskripsi
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
7206.10.10 - - Containing by weight more than 0.6% of carbon
7206.10.90 - - Other 
7206.90.00 - Other 
7207 Semi-finished products of iron or non-alloy steel
7207.11.00 - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207.12.10 - - - Slabs
7207.12.90 - - - Other 
7207.19.00 - - Other 
7207.20.10 - - - Slabs
7207.20.21 - - - - Blocks roughly shaped by forging; sheet bars
7207.20.29 - - - - Other 
7207.20.91 - - - Slabs
7207.20.92 - - - - Blocks roughly shaped by forging; sheet bars
7207.20.99 - - - - Other 
7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.
7208.27.10 - - - Of a thickness of less than 2 mm
7208.27.90 - - - Other 
7208.39.00 - - Of a thickness of less than 3 mm
7208.40.00 - Not in coils, not further worked than hot-rolled, with patterns in relief
7208.54.00 - - Of a thickness of less than 3 mm
7208.90.00 - Other 
7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated.
7209.15.00 - - Of a thickness of 3 mm or more
7209.16.00 - - Of a thickness exceeding 1 mm but less than 3 mm
7209.25.00 - - Of a thickness of 3 mm or more
7209.26.00 - - Of a thickness exceeding 1 mm but less than 3 mm
7209.90.10 - - Corrugated
7209.90.90 - - Other 
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.
7210.11.10 - - - Containing by weight more than 0.6% of carbon
7210.11.90 - - - Other 
7210.12.10 - - - Containing by weight more than 0.6% of carbon
7210.12.90 - - - Other 
7210.20.10 - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7210.20.90 - - Other 
7210.30.11 - - - Of a thickness of less than 1,2 mm
7210.30.12 - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm 
7210.30.19 - - - Other 
7210.30.91 - - - Of a thickness not exceeding 1.2 mm
7210.30.99 - - - Other 
7210.41.11 - - - - Of a thickness not exceeding 1.2 mm
7210.41.12 - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm 
7210.41.19 - - - - Other 
7210.41.91 - - - - Of a thickness not exceeding 1.2 mm
7210.41.99 - - - - Other 
7210.49.11 - - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04% of carbon and of a thickness not exceeding 1.2 mm
7210.49.12 - - - - Other, of a thickness not exceeding 1.2 mm
7210.49.13 - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm 
7210.49.19 - - - - Other 
7210.49.91 - - - - Of a thickness not exceeding 1.2 mm
7210.49.99 - - - - Other 
7210.50.00 - Plated or coated with chromium oxides or with chromium and chromium oxides
7210.61.11 - - - - Of a thickness not exceeding 1.2 mm
7210.61.12 - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm 
7210.61.19 - - - - Other 
7210.61.91 - - - - Of a thickness not exceeding 1.2 mm
7210.61.99 - - - - Other 
7210.69.11 - - - - Of a thickness not exceeding 1.2 mm
7210.69.12 - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm 
7210.69.19 - - - - Other 
7210.69.91 - - - - Of a thickness not exceeding 1.2 mm
7210.69.99 - - - - Other 
7210.70.10 - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7210.70.90 - - Other 
7210.90.10 - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7210.90.90 - - Other 
7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.
7212.10.10 - - Hoop and strip, of a width not exceeding 400 mm 
7212.10.91 - - - Containing by weight less than 0.6% of carbon
7212.10.99 - - - Other 
7212.20.10 - - Hoop and strip, of a width not exceeding 400 mm 
7212.20.20 - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.20.90 - - Other 
7212.30.10 - - Hoop and strip, of a width not exceeding 400 mm 
7212.30.20 - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.30.91 - - - Coated with zinc  by the iron-zinc alloyed coating method, containing by weight less than 0.04% of carbon
7212.30.99 - - - Other 
7212.40.10 - - Hoop and strip, of a width not exceeding 400 mm 
7212.40.20 - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.40.90 - - Other 
7212.50.11 - - - Hoop and strip, of a width not exceeding 400 mm 
7212.50.12 - - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.50.19 - - - Other 
7212.50.21 - - - Hoop and strip, of a width not exceeding 400 mm 
7212.50.22 - - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.50.29 - - - Other 
7212.50.91 - - - Hoop and strip, of a width not exceeding 400 mm 
7212.50.92 - - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.50.99 - - - Other 
7212.60.10 - - Hoop and strip, of a width not exceeding 400 mm 
7212.60.20 - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7212.60.90 - - Other 
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.
7213.10.00 - Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20.00 - Other, of free-cutting steel
7213.91.10 - - - Of a kind used for producing soldering sticks
7213.91.90 - - - Other 
7213.99.10 - - - Of a kind used for producing soldering sticks
7213.99.90 - - - Other 
7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extructed, but including those twisted after rolling.
7214.10.11 - - - Of circular cross-section
7214.10.19 - - - Other 
7214.10.21 - - - Of circular cross-section
7214.10.29 - - - Other 
7214.20.39 - - - - Other 
7214.20.49 - - - - Other 
7214.20.59 - - - - Other 
7214.20.69 - - - - Other 
7214.30.00 - Other, of free-cutting steel
7214.91.10 - - - Containing by weight less than 0.6% of carbon
7214.91.20 - - - Containing by weight 0.6% or more of carbon
7214.99.10 - - - Containing by weight 0.6% or more of carbon, other than of circular cross-section
7214.99.90 - - - Other 
7215 Other bars and rods of iron or non-alloy steel.
7215.10.00 - Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.50.10 - - Containing by weight 0.6% or more of carbon, other than of circular cross-section
7215.50.99 - - - Other 
7215.90.90 - - Other 
7216 Angles, shapes and sections of iron or non-alloy steel.
7216.21.00 - - L sections
7216.40.00 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.61.00 - - Obtained from flat-rolled products
7216.69.00 - - Other 
7216.91.00 - - Cold-formed or cold-finished from flat-rolled products
7216.99.00 - - Other 
7217 Wire of iron or non-alloy steel.
7217.10.10 - - Containing by weight less than 0.25% of carbon
7217.10.29 - - - Other 
7217.10.39 - - - Other 
7217.20.99 - - - Other 
7217.30.32 - - - Other, plated or coated with tin
7217.30.39 - - - Other 
7217.90.10 - - Containing by weight less than 0.25% of carbon
7217.90.90 - - Other 
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more.
7219.32.00 - - Of a thickness of 3 mm or more but less than 4.75 mm
7219.33.00 - - Of a thickness exceeding 1 mm but less than 3 mm
7219.34.00 - - Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.35.00 - - Of a thickness of less than 0.5 mm
7219.90.00 - Other 
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm.
7220.20.10 - - Hoop and strip, of a width not exceeding 400 mm  
7220.20.90 - - Other 
7220.90.10 - - Hoop and strip, of a width not exceeding 400 mm 
7220.90.90 - - Other 
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.
7224.10.00 - Ingots and other primary forms
7224.90.00 - Other 
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more.
7225.50.90 - - Other 
7225.91.90 - - - Other 
7225.92.90 - - - Other 
7225.99.90 - - - Other 
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm.
7226.91.90 - - - Other 
7226.92.90 - - - Other 
7226.99.19 - - - - Other 
7226.99.11 - - - - Plated or coated with tin
7226.99.91 - - - - Plated or coated with tin
7226.99.99 - - - - Other 
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.
7227.90.00 - Other 
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.
7228.30.10 - - Of circular cross-section
7228.30.90 - - Other 
7228.40.10 - - Of circular cross-section
7228.50.10 - - Of circular cross-section
7228.60.10 - - Of circular cross-section
7228.70.10 - - Not further worked than hot-rolled, hot-drawn or extruded
7228.70.90 - - Other 
7229 Wire of other alloy-steel
7229.90.90 - - Other 
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
7306.50.90 - - Other 

Daftar Produk Baja yang Memerlukan Pemeriksaan Kualitas Menurut Standar Nasional Vietnam (TCVN), Standar Nasional Negara Pengekspor

1. Daftar produk baja yang memerlukan inspeksi mutu.

Kode HS Deskripsi
7207 Semi-finished products of iron or non-alloy steel
7207.11.00 - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207.12.10 - - - Slabs
7207.12.90 - - - Other 
7207.19.00 - - Other 
7207.20.10 - - - Slabs
7207.20.21 - - - - Blocks roughly shaped by forging; sheet bars
7207.20.29 - - - - Other 
7207.20.91 - - - Slabs
7207.20.92 - - - -Blocks roughly shaped by forging; sheet bars
7207.20.99 - - - - Other 
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.
7210.11.10 - - - Containing by weight 0.6% or more of carbon
7210.11.90 - - - Other 
7210.12.10 - - - Containing by weight 0.6% or more of carbon
7210.12.90 - - - Other 
7210.20.10 - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
7210.20.90 - - Other 
7210.30.11 - - - Of a thickness not exceeding 1.2 mm
7210.30.12 - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm 
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.
7224.10.00 - Ingots and other primary forms
7224.90.00 - Other 
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more.
7225.91.90 - - - Other 
7225.92.90 - - - Other 
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm.
7226.99.11 - - - - Plated or coated with tin
7226.99.91 - - - - Plated or coated with tin
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
7306.50.90 - - Other 

2. Daftar produk baja yang memerlukan deklarasi impor dan sertifikasi permintaan baja impor.

  • Baja dengan kode HS: 7224.10.00; 7224.90.00.

2.2 Regulasi Teknis Baja Penguat Beton

QCVN 7:2010/BKHCN National Technical Regulation on Steel for the Reinforcement of Concrete.

Regulasi ini menetapkan batas persyaratan teknis baja yang digunakan sebagai penguat beton, dan persyaratan pengendalian mutu baja yang diproduksi di Viet Nam, baja impor, dan beredar di pasar.

Aturan yang diterapkan antara lain: (selengkapnya dapat dilihat disini.)

  • Ketentuan Umum (lingkup, tujuan. dsb.)
  • Persyaratan Teknis
  • Metoda Uji
  • Penandaan
  • Manajemen Mutu
  • Tanggung Jawab Organisasi dan Individu
  • Organisasi Pelaksana

2.3 Regulasi Teknis Baja Tahan Karat (Stainless Steel).

QCVN 20:2019/BKHCN National Technical Regulation on Stainless Steel.

Regulasi ini menetapkan batasan komposisi unsur kimia baja tahan karat dan persyaratan manajemen mutu untuk baja tahan karat produksi dalam negeri, impor, dan peredaran di pasaran. Aturan yang diterapkan antara lain (selengkapnya dapat dilihat disini):

  • Ketentuan Umum
  • Persyaratan Teknis dan Metode Pengujian
  • Persyaratan Pelabelan
  • Persyaratan Manajemen
  • Organisasi Pelaksanaan

 

Daftar Baja pada Lingkup QCVN 20:2019/BKHCN.

No. Nama Kelompok Produk Kode HS
1 Products of flat-rolled stainless steel, with a width of 600 mm or more 7219.11.00
7219.12.00
7219.13.00
7219.14.00
7219.21.00
7219.22.00
7219.23.00
7219.24.00
7219.31.00
7219.32.00
7219.33.00
7219.34.00
7219.35.00
7219.90.00
2 Products of flat-rolled stainless steel, whose width is less than 600 mm 7220.11.10
7220.11.90
7220.12.10
7220.12.90
7220.20.10
7220.20.90
7220.90.10
7220.90.90
3 Hot rolled stainless steel rods and rods, irregular roll form 7221.00.00
4 Stainless steel in the form of other rods and rods; stainless steel in the form of corners, molds and other shapes 7222.11.00
7222.19.00
7222.20.10
7222.20.90
7222.30.10
7222.30.90
7222.40.10
7222.40.90
5 Stainless Steel Wire 7223.00.10
7223.00.90

3. Standar.

  • TCVN 9442:2013 Cast iron gate valves
  • TCVN 4653-1:2009 Iron ores. Determination of total iron content. Part 1: Titrimetric method after tin(II) chloride reduction
  • TCVN 4653-2:2009 Iron ores - Determination of total iron content - Part 2: Titrimetric methods after titanium(III) chloride reduction
  • TCVN 1665:2009 Iron ores - Determination of mass loss after ignition
  • TCVN 8625:2010 Iron ores. Sampling and sample preparation procedures
  • TCVN 8510:2010 Steel and iron. Determination of arsenic content. Spectrophotometric method
  • TCVN 8517:2010 Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method
  • TCVN 8506:2010 Steel and iron. Determination of titanium content. Diantipyrylmethane spectrometric method
  • TCVN 4653-1:2009 Iron ores. Determination of total iron content. Part 1: Titrimetric method after tin(II) chloride reduction
  • TCVN 7972:2008 Ductile iron pipelines. Hydrostatic testing after installation
  • TCVN 1829:2008 Ductile iron pipelines.Tube. Flanging test
  • TCVN 2942:1993 Grey iron pipes, special castings and grey iron parts for pressure main lines
  • TCVN 385:1970 Grey cast iron. Tolerances of dimensions and masses. Excess dimensions for mechanical treatment
  • TCVN 8993:2021 Cold-reduced tinmill products - Electrolytic chromium/chromium oxide-coated steel
  • TCVN 12002:2020 Steel structures - Production and quality control
  • TCVN 13067:2020 Steel Finger expansion joints - Specifications and test methods
  • TCVN 12556:2019 Rolling bearings – Steel cylindrical rollers – Dimensions and tolerances
  • TCVN 7571-1:2019 Hot-rolled steel sections - Part 1: Equal - leg angles
  • TCVN 7571-2:2019 Hot-rolled steel sections - Part 2: Unequal - leg angles
  • TCVN 12853:2019 Polymer composite material for external strengthening of steel–reinforced concrete structures – Specification and Test method
  • TCVN 6170-9:2019 Fixed offshore platforms - Part 9: Steel template (jacket) platforms
  • TCVN 7571-15:2019 Hot-rolled steel sections - Part 15: I sections
  • TCVN 7571-11:2019 Hot-rolled steel sections - Part 11: U sections
  • TCVN 7571-21:2019 Hot-rolled steel sections - Part 21: T sections
  • TCVN 12816-1:2019 Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 1: Pull-off testing
  • TCVN 12816-2:2019 Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 2: Cross-cut testing and X-cut testing
  • TCVN 12705-5:2019 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems
  • TCVN 12514:2018 Zinc-coated steel for the reinforcement of concrete
  • TCVN 12515:2018 Steel wire rod - Dimensions and tolerances
  • TCVN 1651-1:2018 Steel for the reinforcement of concrete - Part 1: Plain bars
  • TCVN 1651-2:2018 Steel for the reinforcement of concrete - Part 2: Ribbed bars
  • TCVN 12228:2018 Aluminium-clad steel wires for electrical purposes
  • TCVN 6522:2018 Hot-rolled steel sheet of structural quality
  • TCVN 12464:2018 Steel slag - Basic technical characteristics and test methods
  • TCVN 12516:2018 Steel wire ring net panels -Definitions and specifications
  • TCVN 6524:2018 Cold-reduced carbon steel sheet of structural quality
  • TCVN 12517:2018 Steel wire rope net panels and rolls - Definitions and specifications
  • TCVN 7858:2018 Cold-reduced carbon steel sheet of commercial and drawing qualities
  • TCVN 12111:2018 Bottom single blade Steel Rotation Pile Foundation – Construction and Acceptance
  • TCVN 6523:2018 Hot-rolled steel sheet of high yield stress structural quality
  • TCVN 8998:2018 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
  • TCVN 12518-1:2018 Steel wire and wire products - Part 1: General test methods
  • TCVN 12392-1:2018 Fibers for fiber-reinforced concrete – Part 1: Steel fiber
  • TCVN 7472:2018 Welding – Fusion-welded joints in steel, nickel, titannium and their alloys (beam welding excluded) – Quality levels for imperfections
  • TCVN 12518-2:2018 Steel wire and wire products - Part 2: Tolerances on wire dimensions
  • TCVN 6525:2018 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
  • TCVN 10355:2018 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
  • TCVN 12160:2018 Cranes - Proof of competence of steel structures
  • TCVN 11782:2017 Asphalt concrete - Specimen prepared by steel roller compactor
  • TCVN 11823-6:2017 Highway bridge design specification - Part 6: Steel structures
  • TCVN 6170-4:2017 Fixed offshore platforms - Part 4: Design of steel structures
  • TCVN 10567:2017 Steel bridge girders - Joint with high strength bolt application - Process and acceptance
  • TCVN 12159:2017 Cranes - General design – Limit states and proof of competence of forged steel hooks
  • TCVN 11977:2017 Steel bar for concrete reinforcement – Test Method and acceptance criteria for gas pressure welded joints
  • TCVN 7571-16:2017 Hot-rolled steel sections - Part 16: H sections
  • TCVN 12142-18:2017 Heat treatable steels, alloy steels and free-cutting steels - Part 1: Bright steel products
  • TCVN 11375:2016 Continuous hot– dip metallic– coated steel sheet for corrugated steel pipe
  • TCVN 11381:2016 Hot rolled twin – roll cast steel sheet of structural quylity and high strength steel
  • TCVN 11383:2016 Continuous hot– dip zinc– coated twin– roll cast steel sheet of structural quality and high strength steel
  • TCVN 11371:2016 Steel products – Vocabulary
  • TCVN 11372:2016 Through – thickness characteristics for steel products
  • TCVN 11416:2016 Fluoro resin paint for steel structures
  • TCVN 11384:2016 Semi– finished steel products for hot rolling
  • TCVN 11334:2016 Zinc– coated steel wires for stranded conductor
  • TCVN 11378:2016 Cold– reduced carbon steel sheet for vitreous enamelling
  • TCVN 11243:2016 Prestressed steel bars – Test method for pull of synchronic system
  • TCVN 11376:2016 Hot – rolled carbon steel sheet of commercial and drawing qualities
  • TCVN 11373:2016 Continuous hot– dip zinc – 5 % aluminium alloy coated steel sheet
  • TCVN 11520:2016 Bottom single blade steel rotation pile foundation – Design requirements
  • TCVN 11380:2016 Hot rolled twin roll cast carbon steel sheet of commercial quality
  • TCVN 11379:2016 Continuously hot rolled steel sheet of structural quality with improved atmospheric corrosion resistance
  • TCVN 11382:2016 Continuous hot– dip zinc coated twin roll cast steel sheet of commercial quality
  • TCVN 11374:2016 Continuous hot dip 55% aluminium / zinc alloy – coated steel sheet of commercial, drawing and structural qualities
  • TCVN 11377:2016 Continuous hot dip aluminium silicon coated cold-reduced carbon steel sheet of commercial and drawing qualities
  • TCVN 11336:2016 Overhead lines – Requirements for greases for aluminium, aluminium alloy and steel bare conductors
  • TCVN 11635-2:2016 Internal combustion engines – Piston rings – Part 2: Rectangular rings made of steel
  • TCVN 11700-1:2016 Pipe flanges – Part 1: Steel flanges for industrial and general service piping systems
  • TCVN 11637-4:2016 Internal combustion engines – Piston rings – Part 4: Half keystone rings made of steel
  • TCVN 11637-3:2016 Internal combustion engines – Piston rings – Part 3: Half keystone rings made of steel
  • TCVN 11652:2016 Hydraulic structures constructinon – Construction and work acceptance of concrete structures and steel reinforced concretes on a slope
  • TCVN 7508-1:2016 Non– destructive testing of welds – Acceptance levels for radiographic testing – Part 1: Steel, nickel, titanium and their alloys
  • TCVN 11639-3:2016 Internal combustion engines – Piston rings – Part 3: Coil– spring– loaded oil control rings made of steel
  • TCVN 11236:2015 Steel and steel products -- Inspection documents
  • TCVN 11235-3:2015 Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
  • TCVN 11221:2015 Steel tubes for water and sewage
  • TCVN 10834:2015 Steel pipe pile for bridge foundation - Design Specification
  • TCVN 10831:2015 Bolted bonnet steel globe valves for general-purpose applications
  • TCVN 11197:2015 Steel piles - Corrosion protection methods - Requirement and selection principle
  • TCVN 11230:2015 Hot-rolled carbon steel sheet as defined by chemical composition
  • TCVN 10865-2:2015 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts
  • TCVN 11222:2015 Plain end seamless precision steel tubes -- Technical conditions for delivery
  • TCVN 11223:2015 Plain end welded precision steel tubes -- Technical conditions for delivery
  • TCVN 11226:2015 Steel tubes -- Continuous character marking and colour coding for material identification
  • TCVN 11229-1:2015 High yield strength flat steel products -- Part 1: General requirements
  • TCVN 11232:2015 Hot-rolled steel sheet of higher yield strength with improved formability
  • TCVN 10865-4:2015 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws
  • TCVN 11224:2015 Plain end as-welded and sized precision steel tubes -- Technical conditions for delivery
  • TCVN 11234-1:2015 High yield strength steel bars and sections -- Part 1: General delivery requirements
  • TCVN 10865-1:2015 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
  • TCVN 11234-3:2015 High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels
  • TCVN 11231:2015 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
  • TCVN 11022-1:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling
  • TCVN 11233-1:2015 High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels
  • TCVN 11022-5:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture
  • TCVN 11235-1:2015 Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements
  • TCVN 11225:2015 Steel tubes -- Preparation of ends of tubes and fittings for welding
  • TCVN 11022-3:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density
  • TCVN 11229-2:2015 High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition
  • TCVN 11022-2:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
  • TCVN 11022-7:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides
  • TCVN 10865-3:2015 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
  • TCVN 11229-3:2015 High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition
  • TCVN 11022-4:2015 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test
  • TCVN 11234-2:2015 High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
  • TCVN 11233-2:2015 High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels
  • TCVN 11235-2:2015 Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general-purpose wire rod
  • TCVN 11235-4:2015 Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications
  • TCVN 10351:2014 Hot-rolled steel plates - Tolerances on dimensions and shape
  • TCVN 10358:2014 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
  • TCVN 10350:2014 Hot-rolled carbon steel strip of commercial and drawing qualities
  • TCVN 10307:2014 Steel bridge structure - General specifications for manufacturing, installing and acceptance
  • TCVN 10270:2014 Steel strand. Standard test method for stress relaxation tension
  • TCVN 10354:2014 Hot-rolled steel sheet in coils of structural quality and heavy thickness 
  • TCVN 10353:2014 Continuously hot-dipped coated steel sheet products − Dimensional and shape tolerances
  • TCVN 10352:2014 Steel − Surface finish of hot-rolled plates and wide flats − Delivery requirements
  • TCVN 9985-7:2014 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels
  • TCVN 10357-2:2014 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate
  • TCVN 10357-1:2014 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths
  • TCVN 9985-3:2014 Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized
  • TCVN 9986-3:2014 Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized
  • TCVN 9985-4:2014 Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties
  • TCVN 9985-5:2014 Steel flat products for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled
  • TCVN 9985-6:2014 Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered
  • TCVN 9986-4:2014 Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties
  • TCVN 10318:2014 Steel pipe piles and stel pipe sheet piles for port harbour. Specification for construction and acceptance
  • TCVN 10317:2014 Steel pipe piles and stel pipe sheet piles for bridge. Specification for construction and acceptance
  • TCVN 7937-3:2013 Steel for the reinforcement and prestressing of concrete. Test methods. Part 3: Prestressing steel
  • TCVN 9840:2013 Stainless steel butt-welding fittings
  • TCVN 9833:2013 Stainless steel tubes for the food industry
  • TCVN 9685:2013 Hot rolled steel sheet piles
  • TCVN 9443:2013 Bolted bonnet steel gate valves
  • TCVN 9836:2013 Stainless steel threaded couplings for the food industry
  • TCVN 9686:2013 Weldable hot rolled steel sheet piles
  • TCVN 9835:2013 Stainless steel clamp pipe couplings for the food industry
  • TCVN 9444:2013 Steel ball valves for general-purpose industrial applications
  • TCVN 9860:2013 Steel Sheet Pile Structures in Transportation Engineering – Design Requirement
  • TCVN 9834:2013 Stainless steel bends and tees for the food industry This standard has been reviewed
  • TCVN 9841:2013 Stainless steel tubes suitable for screwing in accordance with TCVN 7701-1 (ISO 7-1)
  • TCVN 9838:2013 Pipework. Stainless steel fittings threaded in accordance with TCVN 7701-1 (ISO 7-1)
  • TCVN 9446:2013 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
  • TCVN 7937-2:2013 Steel for the reinforcement and prestressing of concrete. Test methods. Part 2: Welded fabric
  • TCVN 9985-1:2013 Steel flat products for pressure purposes. Technical delivery conditions. Part 1: General requirements
  • TCVN 9837:2013 Non-alloy and alloy steel butt-welding fittings
  • TCVN 9245:2012 Steel pipe piles
  • TCVN 5575:2012 Steel structures - Design standard
  • TCVN 9246:2012 Steel pipe sheet piles
  • TCVN 9392:2012 Metal arc welding of steel for concrete reinforcement
  • TCVN 9013:2011 Polyurethane paint for steel structures
  • TCVN 8593:2011 Cold-reduced carbon steel sheet according to hardness requirements
  • TCVN 8889:2011 Non-alloy steel fittings threaded to TCVN 7701-1 (ISO 7-1)
  • TCVN 8595:2011 Cold-reduced steel sheet of higher yield strength with improved formability
  • TCVN 8888:2011 Carbon steel tubes suitable for screwing in accordance with TCVN 7701-1 (ISO 7-1)
  • TCVN 8596:2011 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
  • TCVN 8591:2011 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
  • TCVN 8592:2011 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
  • TCVN 7934:2009 Epoxy-coated steel for the reinforcement of concrete
  • TCVN 8163:2009 Steel for the reinforcement of concrete. Threaded coupler splice
  • TCVN 5757:2009 Steel wire ropes for general purposes. Minimum requirements
  • TCVN 5709:2009 Hot-rolled carbon steel for building. Technical requirements
  • TCVN 4399:2009 Steel and steel products. General technical delivery requirements
  • TCVN 1651-3:2008 Steel for the reinforcement of concrete - Part 3: Welded fabric
  • TCVN 7860:2008 Flat rolled steel products for welded gas cylinders
  • TCVN 6526:2006 Hot-rolled steel strip of structural quality
  • TCVN 6365-1:2006 Steel wire for mechanical springs. Part 1: General requirements
  • TCVN 7550:2005 Steel wire ropes for lifts. Minimum requirements
  • TCVN 6418:1998 Steel tapered pails. Technical requirements
  • TCVN 6419:1998 Steel tapered pail. Test methods
  • TCVN 6369:1998 Steel wire ropes for general purposes. Technical requirement
  • TCVN 6052:1995 Steel Scaffolding
  • TCVN 5833:1994 Steel drum for liquid
  • TCVN 5834:1994 Corrosion-resistant steel tanks for water
  • TCVN 2362:1993 Welding steel wires
  • TCVN 5758:1993 Steel wire cloth
  • TCVN 1471:1985 Steel bench hammers
  • TCVN 4148:1985 Steel for ball and rolling bearings
  • TCVN 1583:1985 High-tensile steel chains for mining machinery
  • TCVN 3784:1983 Hot-dip tin-coated hot-rolled steel sheets
  • TCVN 3601:1981 Thin roofing steel sheet
  • TCVN 7446-1:2004 Steels – Classification – Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition

 

Informasi standar selengkapnya dapat diakses disini.  

4.Lembaga Berwenang

The Ministry of Industry and Trade Viet Nam adalah Lembaga pemerintah yang bertanggung jawab pada pertumbuhan, promosi, tata kelola, regulasi, pengelolaan dan pertumbuhan industri dan perdagangan.
 
Lembaga pemerintah di bawah the Ministry of Science and Technology (MOST), yang bertanggung jawab untuk memberi saran kepada Pemerintah dan MOST tentang tata kelola negara di bidang standardisasi, metrologi dan mutu.

5. Informasi Lainnya.

 


Diterbitkan pada  29 Sep 2022

Barang Besi & Baja
  • 1. Undang-Undang.
  • 1.1 Manjemen Perdagangan Luar Negeri.
  • 1.2 Undang-Undang Mutu Produk dan barang.
  • 1.3 Undang-Undang Standar dan Regulasi Teknis.
  • 1.4 Undang-Undang Perlindungan Hak Konsumen.
  • 2. Regulasi.
  • 2.1 Pengendalian Mutu Produk Baja.
  • 2.2 Regulasi Teknis Baja Penguat Beton
  • 2.3 Regulasi Teknis Baja Tahan Karat (Stainless Steel).
  • 3. Standar.
  • 4.Lembaga Berwenang
  • 5. Informasi Lainnya.
Produk Ekspor Lainnya ke Vietnam

Temukan teknis dan persyaratan mutu produk ekspor

Semua produk (Vietnam)

Tautan Terkait